XING2 2506 FPV Motor

Our XING series NextGen motors have become popular after the initial release in 2018 and became the new standard on the market. Was it the curved shape or the internal damping ring to protect the bearing, or was it the higher quality NSK bearings coupled with a higher grade titanium alloy shaft? We've been copied and compared all these years, but now it's time to set a new standard again! We're finally ready to announce our predecessor the XING2!

The smooth, reliable and powerful XING motors were upgraded and we achieved an even higher standard in our manufactory as well as better performance than ever before. New center slotted N52H curved arc magnets were introduced to drastically reduce response time of the motor! Maybe the biggest bottleneck of our FPV flight controller is the motor due to it's translation delay of it braking and accelerating. XING2 motors offer faster response to translate your PID loop quicker and get that locked-in feeling you were always looking for!

Due to the high quality materials used and the durable joint of bell and shaft, we were able to reduce the magnet air gap and stator lamination to a minimum. The smaller the air gap is, the lower that reluctance and the higher the magnetic flux (which is the magnetic analog of current) causing more efficiency and higher power!

1. iFlight product is for fun purposes only and does not support autonomous flight.

2. iFlight products may be used for civilian purposes only and any direct or indirect use of iFlight products for or in connection with the following is prohibited:

(1) Any military combat purpose or military combat related use;  

(2) Terrorist activities: The purchaser also shall require its customers or end users to comply with the foregoing requirements.

3. iFlight Partners must strictly adhere to applicable export control and sanction laws as well as any written compliance requirements regarding these controls issued by iFlight from time to time.

If Party A has violated applicable export control or economic sanctions laws and regulations, Party B has the right to immediately suspend delivery of products to Party A or terminate relevant cooperation without any liability.

For more specific content, please check: https://shop.iflight.com/Export-Policy-info

5mm titanium alloy shaft, our strongest prop shaft ever!

Smooth and long-lasting NSK 10x4x4 bearings

Center slotted N52H curved arc magnets

XING O-ring bearing gap protection

Crash resistant 7075 aluminum bell

Motor wires protector

Dynamically balanced

If one of the three plates in the original drone( Upper Plate (middle), Bottom Plate, and CNC Camera Side Plate) needs to be replaced from V1 to V1.1, you need to replace the following 4 parts with V1.1 at the same time, otherwise, the V1.1 plate will be incompatible.

In other words, you can directly purchase the V1.1 Plate Set. The set will include:

1 x Bottom plate V1.1

1 x Upper plate (middle) V1.1

1 x CNC camera side plate V1.1

1 x Screw package V1.1

Due to manufacturing processes, our products may have a standard manufacturing tolerance of +0.1mm.

Model: XING2 2506 Black Motor

KV: 1500KV / 1850KV

Weight(included wire): 38.2g / 43.6g

Dimension: φ31.7*34.6mm

Interphase Resistance: 74.88mΩ / 47.6mΩ

Input Volts: 25.2V

Peak Current: 33.26A / 50.33A

Max Watt: 817.5W / 1258.8W

Mounting Holes: 16*16 φ3mm

Rotor Specifications: Unibell

Shaft Diameter: 5mm

Shaft Protruding Length: 15mm

Lead: 160mm-20AWG

Magnet: N52H Curved

Configuration: 12N14P

Bearing Type: NSK

Bearing Specification: φ10*φ4*4

Winding: Single Strand copper winding

Upper(middle) plate thickness: 4mm

Bottom plate thickness: 4mm

Arm Thickness: 8mm

1 x M5 Flanged Nylon Insert Lock Nut

1 x XING2 2506 Motor Black (KV is optional)

4 x M3*8mm screws

June 19, 2024: The bottom plate, upper plate, screw package, and CNC camera side plate were updated to v1.1. The bottom plate and upper plate thickness increased. (For DJi O3 Version.）

1 x M5 Flanged Nylon Insert Lock Nut

1 x XING2 2506 Motor Black (KV is optional)

4 x M3*8mm screws