Defender 25 F7 AIO - HD

1. This AIO without OSD Chip, it made for Defender 25 HD VTX only.

2. Bigger size than the BLITZ Whoop BGA F7 AIO.

1x Replacement parts for AOS 5.5 EVO V1.2 Frame（optional）

1. This AIO without OSD Chip, it made for Defender 25 HD VTX only.

2. Bigger size than the BLITZ Whoop BGA F7 AIO.

This is new generation F7 AIO designed for Defender 25. A future proof all-in-one FC to step up the game and make some more room for future flight firmware development like Betaflight, Emuflight etc. Lightweight, minimum size, minimum work. Solder your motor wires on and let's go! 

Due to manufacturing processes, the thickness of our products may have a standard manufacturing tolerance of ±0.2mm. The size of the hole may have a standard manufacturing tolerance of ±0.1mm.

This is new generation F7 AIO designed for Defender 25. A future proof all-in-one FC to step up the game and make some more room for future flight firmware development like Betaflight, Emuflight etc. Lightweight, minimum size, minimum work. Solder your motor wires on and let's go! 

Pass-through DJI O3 and Caddx Vista/Polar Connector

MCU: STM32F722

Gyro: ICM42688

OSD: NO

Blackbox: 32MB Onboard Flash

Gyro: DPS310

Weight: 12.8g±0.2g 

The Mach R5 Sport aims to provide racing pilots with a high-quality finished FPV frame that allows for DIY customization. Utilizing carbon plates and plastic components, not only facilitates easy maintenance but also reduces the weight of the drone while enhancing overall stability. 

Pass-through DJI O3 and Caddx Vista/Polar Connector

MCU: STM32F722

Gyro: ICM42688

OSD: NO

Blackbox: 32MB Onboard Flash

Gyro: DPS310

Weight: 12.8g±0.2g 

MCU: STM32F722

Gyro: ICM42688

Blackbox: 32MB Onboard Flash

BEC output: 5V 2.5A 

WS2812 LED Strip: Yes

Buzzer: Yes

Barometer: DPS310

Connector: SH1.0 to Type-C adapter

OSD: N/A (HD VTX version)

FC Firmware： IFLIGHT_BLITZ_F722_X1

Mounting pattern: 25.5*25.5mm φ3mm

Dimensions: 32.5*32.5mm

Input voltage: 2-4S, support LIHV battery

Smartaudio / IRC Tramp VTX protocol supported

June 22, 2024: Upper Plate upgrade for Mach R5 Sport Frame Kit.

MCU: STM32F722

Gyro: ICM42688

Blackbox: 32MB Onboard Flash

BEC output: 5V 2.5A 

WS2812 LED Strip: Yes

Buzzer: Yes

Barometer: DPS310

Connector: SH1.0 to Type-C adapter

OSD: N/A (HD VTX version)

FC Firmware： IFLIGHT_BLITZ_F722_X1

Mounting pattern: 25.5*25.5mm φ3mm

Dimensions: 32.5*32.5mm

Input voltage: 2-4S, support LIHV battery

Smartaudio / IRC Tramp VTX protocol supported

ESC MCU: STM32G071

Driver: FD6288

Input voltage: 2-4S Support LIHV battery

Output current: 20A, peak value 30A (10 seconds)

ESC firmware: IFLIGHT_BLITZ_G071_01

Current sensor: ratio 200 (1/10mV/A)

BEC: NO

ESC Telemetry: Yes（PCB routed, set UART6 for telemetry）

Bidirectional DShot: Yes

Supports DShot DShot150/300/600/MultiShot/ OneShot etc.

Product Name: Mach R5 Sport Race Frame Kit

Wheelbase: 210mm(Canopy Ver./ Lite Ver.) 

Frame Dimension: 148*148*51mm(Canopy ver.) / 148*148*37mm(Lite ver.) 

Top Plate: 2mm (Lite ver.)

Arm Thickness: 5.5mm(Canopy Ver./ Lite Ver.) 

Bottom Plate Thickness: 2mm

Upper Plate Thickness: 4mm(Canopy Ver./ Lite Ver.)

Max Flight Stack Height: 25mm(Canopy Ver./ Lite Ver.) 

Max VTX Height: 25mm(Canopy Ver./ Lite Ver.) 

FC Mounting：20*20/Φ3 mm

Motor Mounting：16*16/Φ3mm

VTX Mounting：20*20/Φ3 mm

Weight: 107g (Canopy Ver.)/128g (Lite ver.)

Recommended motor: 22**/23**/24**/25** series motor

ESC MCU: STM32G071

Driver: FD6288

Input voltage: 2-4S Support LIHV battery

Output current: 20A, peak value 30A (10 seconds)

ESC firmware: IFLIGHT_BLITZ_G071_01

Current sensor: ratio 200 (1/10mV/A)

BEC: NO

ESC Telemetry: Yes（PCB routed, set UART6 for telemetry）

Bidirectional DShot: Yes

Supports DShot DShot150/300/600/MultiShot/ OneShot etc.

1 x Defender 25 BLITZ F7 AIO

1 x Capacitor 470uF/35V (Onboard)

1 x XT30U Male 18AWG cable 70mm

1 x 1.0-7P cable 50mm-28mm

1 x 1.0-7P cable 50mm

4 x M2 silicon grommets

BLITZ Mini F722 Flight Controller

BLITZ E55R 4-IN-1 2-6S 55A ESC

R5 2207 motors

1 x Defender 25 BLITZ F7 AIO

1 x Capacitor 470uF/35V (Onboard)

1 x XT30U Male 18AWG cable 70mm

1 x 1.0-7P cable 50mm-28mm

1 x 1.0-7P cable 50mm

4 x M2 silicon grommets

iFlight product is for fun purposes only and does not support autonomous flight.

1 x Mach R5 Sport Frame Kit (Non-assembled)

2 x Battery straps (20*250mm)

1 x TPU Set

2 x  Anti-slip Battery Pads

iFlight product is for fun purposes only and does not support autonomous flight.