BLITZ F745 Flight Controller

Improved circuit design, better components and lower electrical noise!

DJI HD VTX Connector (Plug-and-Play / No soldering required)

FC indicator LEDs for visual debugging

Support Betaflight, Ardupilot firmware

iFlight product is for fun purposes only and does not support autonomous flight.

Improved circuit design, better components and lower electrical noise!

DJI HD VTX Connector (Plug-and-Play / No soldering required)

FC indicator LEDs for visual debugging

Support Betaflight, Ardupilot firmware

MCU: STM32F745

Gyro: ICM42688

Barometer: DPS310

OSD Chip: AT7456E

Flash: 32MB (Blackbox flash)

UARTS: 6

Smartaudio / IRC Tramp VTX protocol supported

LED controller: Yes

Beeper pad: Yes

Mount pattern: 30.5*30.5mm

Dimensions: 36.5*35 mm

Weight: 7.8g

BEC: Output 5V 2.5A continuous output current, 3A peak current (15 seconds)

         Output 9V 2.5A continuous output current, 3A peak current (15 seconds)

BF Firmware target: IFLIGHT_BLITZ_F7_AIO

Ardupilot Firmware: BlitzF745

Since BLheli32 Configuration is closed due to regulatory issues, if you need to adjust the parameters of this ESC, please download "BLHeliSuite32Test" in the "Download" column of this page.

MCU: STM32F745

Gyro: ICM42688

Barometer: DPS310

OSD Chip: AT7456E

Flash: 32MB (Blackbox flash)

UARTS: 6

Smartaudio / IRC Tramp VTX protocol supported

LED controller: Yes

Beeper pad: Yes

Mount pattern: 30.5*30.5mm

Dimensions: 36.5*35 mm

Weight: 7.8g

BEC: Output 5V 2.5A continuous output current, 3A peak current (15 seconds)

         Output 9V 2.5A continuous output current, 3A peak current (15 seconds)

BF Firmware target: IFLIGHT_BLITZ_F7_AIO

Ardupilot Firmware: BlitzF745

UART 1 for VTX HD / Analog

UART 2 for a Receiver

UART 3/4/5 for GPS or other sensors that require a serial port

UART 6 for ESC Telemet

Introducing the BLITZ H7 Pro Flight Controller - a powerhouse with a dual-sided shielding design that not only protects against interference but also safeguards the controller from debris, ensuring seamless operation. The detachable shielding allows for easy TF card replacement. Upgraded with a robust STM32H743 MCU, it supports input voltages up to 12S and is compatible with ArduPilot firmware, offering customers endless possibilities. Upgrade to the BLITZ H7 Pro for unparalleled performance.

UART 1 for VTX HD / Analog

UART 2 for a Receiver

UART 3/4/5 for GPS or other sensors that require a serial port

UART 6 for ESC Telemet

1 x BLITZ F745 Flight Controller

Features 35x35mm mounting holes, providing a larger size for optimized flight controller PCB wiring.

GH1.25 connector design enhances terminal connection reliability and ensures easy assembly.

Utilizes an SD card for the flight controller's black box, offering increased capacity to record more flight data.

Dual-sided shielding design offers interference protection and safeguards the flight controller from foreign object malfunctions.

Removable expansion soldering pad board enables advanced users to easily connect additional peripherals.

Incorporates a high-voltage DC-DC buck converter with a chip voltage endurance of up to 100V, delivering stable and reliable voltage for the flight controller and video transmission.

Supports Betaflight and Ardupilot firmware.

1 x BLITZ F745 Flight Controller

iFlight product is for fun purposes only and does not support autonomous flight.

Product Name: BLITZ H7 Pro Flight Controller

MCU: STM32H743

Gyro: ICM42688

Baro: DPS310

OSD: AT7456E

Input Voltage: 14.8V-50.4V (4S-12S LIPO)

Blackbox: SD Card

UARTS: 7

Smartaudio / IRC Tramp VTX protocol supported

LED controller: Yes

Beeper pad: Yes

Mount pattern: 35*35mm/φ4

Dimensions: 42*42*11.3mm

Weight: 20g

BEC: 5V 3A,12V 2.5A

BF Firmware target: IFLIGHT_BLITZ_H7_PRO

INAV Firmware: IFLIGHT_BLITZ_H7_PRO

Ardupilot Firmware: BlitzH743Pro

iFlight product is for fun purposes only and does not support autonomous flight.