Defender 20 Lite 2S HD - RTF(Lite)

Because this product is a virtual product, we will send the key via email after the customer receives the Commando 8 package. Therefore, please contact customer service to obtain it after receiving the package.

This key can only be used on Steam.

1 x NIDICI 3115 Brushless Motor

4 x M3*10 screws

1 x M5 Flange Nut

Because this product is a virtual product, we will send the key via email after the customer receives the Commando 8 package. Therefore, please contact customer service to obtain it after receiving the package.

This key can only be used on Steam.

iFlight's newly upgraded Defender series, a lightweight cinewhoop equipped with the DJI O4 Air Unit. Featuring a compact 2-inch palm size, easy to carry. With low flight noise, it enables indoor filming without disturbance. 

Supports Type-C charging adapter* for fast charging, making it convenient foroutdoor use. The prop guard can be quickly disassembled with only 4 screws, allowing for more agile flight. Perfect for indoor flying, short trips, camping, and everyday shooting scenarios. Experience a new level of FPV cinematic flight.

High Quality XT60H/XT30U Male Power Cable for NEW RED.

Used to convert a battery with an XT60H-Female/XT30U-Male to power the Cinema Cameras.

iFlight's newly upgraded Defender series, a lightweight cinewhoop equipped with the DJI O4 Air Unit. Featuring a compact 2-inch palm size, easy to carry. With low flight noise, it enables indoor filming without disturbance. 

Supports Type-C charging adapter* for fast charging, making it convenient foroutdoor use. The prop guard can be quickly disassembled with only 4 screws, allowing for more agile flight. Perfect for indoor flying, short trips, camping, and everyday shooting scenarios. Experience a new level of FPV cinematic flight.

August 13, 2025: AIO changed from F411 AIO to Borg F7 AIO.

Input voltage: 12V

Cable length: 320-325mm

Male Connector: XT60H-Female/XT30U-Male Style

August 13, 2025: AIO changed from F411 AIO to Borg F7 AIO.

4K HD Video Recording

Built-in DJI O4 Air Unit 4K recording in a lightweight 2-inch frame with stabilization and Gyroflow support. With large storage capacity and low-latency, long-range video transmission, it ensures smooth first-person view footage for a more immersive flight experience.

Lightweight and Portable

Designed with a compact palm-sized frame, this device easily fits in a pocket for convenient portability. Its ultra-lightweight build and low flight noise make it ideal for undisturbed indoor flying, while its versatility allows it to navigate complex and narrow environments.

Enhanced Flight Performance

With hover throttle as low as 25%, this device provides ample power for effortless flight. It offers up to 7.5 minutes of flight time, extending creative possibilities and ensuring a smooth and enjoyable flying experience.

Quick-Release Prop Guard for Seamless Switching

The prop guard enhances safety by preventing accidents during crashes, while its quick-release design allows for seamless switching. Removing the prop guard increases agility, enabling dynamic freestyle maneuvers for more advanced flying techniques.

Podded Camera Structure 

The customized O4 camera mount features an independent podded structure to minimize vibration, ensuring raw footage remains as smooth as possible. It also provides high-quality gyro data for in-built or post-processing stabilization, delivering jello-free results.

Plug-In Battery with Automatic Power-On

 Simplifying operation, the device automatically powers on when the battery is inserted, making it user-friendly and ready to fly in seconds.

XT60H-Female Power Cable for Taurus X8 V3, Taurus X8 Pro, Taurus X8 Pro Max, Protek 60, Proxima 6

XT30U-Male Power Cable Only for Centurion X8, Taurus X8 V3, Taurus X8 Pro, Protek 60

4K HD Video Recording

Built-in DJI O4 Air Unit 4K recording in a lightweight 2-inch frame with stabilization and Gyroflow support. With large storage capacity and low-latency, long-range video transmission, it ensures smooth first-person view footage for a more immersive flight experience.

Lightweight and Portable

Designed with a compact palm-sized frame, this device easily fits in a pocket for convenient portability. Its ultra-lightweight build and low flight noise make it ideal for undisturbed indoor flying, while its versatility allows it to navigate complex and narrow environments.

Enhanced Flight Performance

With hover throttle as low as 25%, this device provides ample power for effortless flight. It offers up to 7.5 minutes of flight time, extending creative possibilities and ensuring a smooth and enjoyable flying experience.

Quick-Release Prop Guard for Seamless Switching

The prop guard enhances safety by preventing accidents during crashes, while its quick-release design allows for seamless switching. Removing the prop guard increases agility, enabling dynamic freestyle maneuvers for more advanced flying techniques.

Podded Camera Structure 

The customized O4 camera mount features an independent podded structure to minimize vibration, ensuring raw footage remains as smooth as possible. It also provides high-quality gyro data for in-built or post-processing stabilization, delivering jello-free results.

Plug-In Battery with Automatic Power-On

 Simplifying operation, the device automatically powers on when the battery is inserted, making it user-friendly and ready to fly in seconds.

Product Name: Defender 20 Lite O4 2S HD ELRS 2.4GHz

Flight Electronics: BLITZ Whoop F411 AIO

Video Transmission: DJI O4 Air Unit

Frame wheelbase: 87mm

Motor: Defender 16 1103 14000KV motors

Prop: Defender 20 Lite 2020*3 props

Weight: 69±3g

Takeoff Weight: Approx. 108±3g (With 600mAh Battery)

Dimensions (L×W×H): 125*125*44.5mm

Max Speed: 75km/h (Manual Mode)

Maximum Takeoff Altitude: 2000 m

Max Hover Time: Approx. 6.5-7.5 min(with 2S 600mAh battery)

Operating Temperature Range: -10° to 40° C

Antennas: Single Antenna

GPS: N/A

1 x XT60H-Female Power Cable for RED (Optional)

1 x XT30U-Male Power Cable for RED(Optional)

Product Name: Defender 20 Lite O4 2S HD ELRS 2.4GHz

Flight Electronics: BLITZ Whoop F411 AIO

Video Transmission: DJI O4 Air Unit

Frame wheelbase: 87mm

Motor: Defender 16 1103 14000KV motors

Prop: Defender 20 Lite 2020*3 props

Weight: 69±3g

Takeoff Weight: Approx. 108±3g (With 600mAh Battery)

Dimensions (L×W×H): 125*125*44.5mm

Max Speed: 75km/h (Manual Mode)

Maximum Takeoff Altitude: 2000 m

Max Hover Time: Approx. 6.5-7.5 min(with 2S 600mAh battery)

Operating Temperature Range: -10° to 40° C

Antennas: Single Antenna

GPS: N/A

Product Name: DJI O4 Air Unit 

Image Sensor: 1/2-inch CMOS Sensor

Lens: FOV: 117.6°

ISO: 100-6400 (Auto); 100-12800 (Manual)

Video Resolution: 1080p/100fps H.265

Video Format: MP4

Max Video Bitrate: 100 Mbps

Color Mode: Normal Mode

Live View Quality: 1080P@30/50/60/100fps

Operating Frequency: 5.170-5.250 GHz; 5.725-5.850 GHz

Transmitter Power (EIRP): .1 GHz: <23 dBm (CE); 5.8 GHz:<30 dBm (FCC)<14 dBm (CE)< 30 dBm (SRRC)

Max Video Transmission Range(With DJI Goggles 3/DJI Goggles N3): 10 km (FCC), 6 km (CE), 6 km (SRRC)

Communication Bandwidth: Max 60 MHz

Antenna: Single antenna

Built-in Storage: 23GB

Supported SD cards: Not supported

Operating Temperature: -10° to 40° C

Weight: Air Unit (camera module included): Approx. 8.2 g

Dimensions: Transmission Module: 30×30× 6 mm (L×W×H)

Designed for Specter and other Cinelifiter Drones, the custom-made Xing2 Motor delivers robust power and precision performance, redefining flight dynamics for FPV enthusiasts. Featuring new center-slotted N52H curved arc magnets, it drastically reduces response time to address the critical bottleneck of traditional motors, minimizing delays in braking and acceleration for faster PID loop translation. 

Due to the high quality materials used and the durable joint of bell and shaft, we were able to reduce the magnet air gap and stator lamination to a minimum. The smaller the air gap is, the lower the reluctance and the higher the magnetic flux (which is the magnetic analog of current), causing more efficiency and higher power!

Product Name: DJI O4 Air Unit 

Image Sensor: 1/2-inch CMOS Sensor

Lens: FOV: 117.6°

ISO: 100-6400 (Auto); 100-12800 (Manual)

Video Resolution: 1080p/100fps H.265

Video Format: MP4

Max Video Bitrate: 100 Mbps

Color Mode: Normal Mode

Live View Quality: 1080P@30/50/60/100fps

Operating Frequency: 5.170-5.250 GHz; 5.725-5.850 GHz

Transmitter Power (EIRP): .1 GHz: <23 dBm (CE); 5.8 GHz:<30 dBm (FCC)<14 dBm (CE)< 30 dBm (SRRC)

Max Video Transmission Range(With DJI Goggles 3/DJI Goggles N3): 10 km (FCC), 6 km (CE), 6 km (SRRC)

Communication Bandwidth: Max 60 MHz

Antenna: Single antenna

Built-in Storage: 23GB

Supported SD cards: Not supported

Operating Temperature: -10° to 40° C

Weight: Air Unit (camera module included): Approx. 8.2 g

Dimensions: Transmission Module: 30×30× 6 mm (L×W×H)

Product Name: Commando 8 ELRS Lite Radio

Weight: 275g (±10g）

Communication Frequency: 5.725-5.850 GHz

Transmission Power(EIRP):

2.4GHz: FCC: 27 dBm; CE: <14 dBm; SRRC: <19 dBm

Operating Current/Volts:  0.6 A @ 7.6 V

Charging Time: 1 hour and 30 mini

Operating Time: Approx. 8 hours

Operating Temperature Range: 0°C  to  40°C（32°F to 104°F）

Charging Temperature Range: 5°C to  40°C（41°F to 104°F）

Xing2 2806.5

KV: 1400KV

Weight(included wire): 54g

Dimension: φ35*37.3mm

Interphase Resistance: 63.4mΩ

Input Volts: 25.2V

Peak Current: 55.54A

Max Watt: 1367.54W

Mounting Holes: 19*19 φ3mm

Rotor Specifications: Unibell

Shaft Diameter: 5mm

Shaft Protruding Length: 15.5mm

Lead: 260mm/18AWG

Magnet: N52H Curved

Configuration: 12N14P

Bearing Type: NSK/NMB

Bearing Specification: φ11*φ5*5

Winding: Single Strand copper winding

Product Name: Commando 8 ELRS Lite Radio

Weight: 275g (±10g）

Communication Frequency: 5.725-5.850 GHz

Transmission Power(EIRP):

2.4GHz: FCC: 27 dBm; CE: <14 dBm; SRRC: <19 dBm

Operating Current/Volts:  0.6 A @ 7.6 V

Charging Time: 1 hour and 30 mini

Operating Time: Approx. 8 hours

Operating Temperature Range: 0°C  to  40°C（32°F to 104°F）

Charging Temperature Range: 5°C to  40°C（41°F to 104°F）

Product Name: DJI Goggles N3

Weight: Approx. 536 g (battery included)

Dimensions (L×W×H): With antennas folded: 193×163×103 mm (L×W×H)

With antennas unfolded: 206×163×132 mm (L×W×H)

Screen Size (single screen): 3.5 inches

Resolution (single screen): 1920×1080

Refresh Rate: Up to 60 Hz

Interpupillary Distance Range: No interpupillary distance adjustment required, ready to use immediately.

Diopter Adjustment Range: Diopter adjustment not supported, can be used with personal glasses.

FOV (single screen): 54°

Operating Frequency: 2.400-2.4835 GHz; 5.150-5.250 GHz; 5.725-5.850 GHz

Transmission Power (EIRP):

2.4 GHz: < 30 dBm (FCC) < 20 dBm (CE/SRRC/MIC)

5.1 GHz: < 23 dBm (CE) < 21 dBm (FCC)

5.8 GHz: < 33 dBm (FCC) < 30 dBm (SRRC)< 14 dBm (CE)

Max Video Transmission Bitrate: 60 Mbps

Operating Temperature Range: -10°C to 40°C (14°F to 104°F)

Power Input: Built-in battery

Supported SD Cards: microSD (up to 512 GB)

1 x XING2 2806.5 motor

1 x M5 Screw nut

4 x M3*6 screws

Product Name: DJI Goggles N3

Weight: Approx. 536 g (battery included)

Dimensions (L×W×H): With antennas folded: 193×163×103 mm (L×W×H)

With antennas unfolded: 206×163×132 mm (L×W×H)

Screen Size (single screen): 3.5 inches

Resolution (single screen): 1920×1080

Refresh Rate: Up to 60 Hz

Interpupillary Distance Range: No interpupillary distance adjustment required, ready to use immediately.

Diopter Adjustment Range: Diopter adjustment not supported, can be used with personal glasses.

FOV (single screen): 54°

Operating Frequency: 2.400-2.4835 GHz; 5.150-5.250 GHz; 5.725-5.850 GHz

Transmission Power (EIRP):

2.4 GHz: < 30 dBm (FCC) < 20 dBm (CE/SRRC/MIC)

5.1 GHz: < 23 dBm (CE) < 21 dBm (FCC)

5.8 GHz: < 33 dBm (FCC) < 30 dBm (SRRC)< 14 dBm (CE)

Max Video Transmission Bitrate: 60 Mbps

Operating Temperature Range: -10°C to 40°C (14°F to 104°F)

Power Input: Built-in battery

Supported SD Cards: microSD (up to 512 GB)

1 x Defender 20 Lite O4 HD BNF

1 x DJI Goggles N3

1 x Commando 8 Lite

1 x Filter Set

1 x Defender 20 Lite 2S 600mAh Battery

1 x Charging Adapter

2 x Defender 20 Lite 2020-3 Props (pairs)

1 x Propeller Removal Tool

1 x Defender 20 Carrying Case

1 x 3-Port Battery Charging Hub

1 x  PD100W Charger

The XING 2812 Cinelifter Motor is specifically engineered for the Centurion X8 BNF, delivering high-efficiency performance as a dedicated cinelifter motor.

Upgraded for enhanced smoothness, reliability, and power, these motors now reflect our manufacturing excellence and surpass previous performance benchmarks. Featuring new center-slotted N52H curved arc magnets, they drastically minimize motor response time, redefining efficiency for professional applications.

1 x Defender 20 Lite O4 HD BNF

1 x DJI Goggles N3

1 x Commando 8 Lite

1 x Filter Set

1 x Defender 20 Lite 2S 600mAh Battery

1 x Charging Adapter

2 x Defender 20 Lite 2020-3 Props (pairs)

1 x Propeller Removal Tool

1 x Defender 20 Carrying Case

1 x 3-Port Battery Charging Hub

1 x  PD100W Charger

1. iFlight product is for fun purposes only and does not support autonomous flight.

2. iFlight products may be used for civilian purposes only and any direct or indirect use of iFlight products for or in connection with the following is prohibited:

(1) Any military combat purpose or military combat related use;  

(2) Terrorist activities: The purchaser also shall require its customers or end users to comply with the foregoing requirements.

3. iFlight Partners must strictly adhere to applicable export control and sanction laws as well as any written compliance requirements regarding these controls issued by iFlight from time to time.

If Party A has violated applicable export control or economic sanctions laws and regulations, Party B has the right to immediately suspend delivery of products to Party A or terminate relevant cooperation without any liability.

For more specific content, please check: https://shop.iflight.com/Export-Policy-info

KV: 1150KV

Weight(included wire): 77g

Dimension: φ33.55*42.8mm

Interphase Resistance: 83.21mΩ

Input Volts: 24V

Peak Current: 61.15A

Max Watt: 1423W

Mounting Holes: 19*19 φ3mm

Rotor Specifications: Segmented bell

Shaft Diameter: 5mm

Shaft Protruding Length: 15.15mm

Lead: 260mm/18AWG

Magnet: N52H Curved

Configuration: 12N14P

Bearing Specification: φ11*φ5*5

Winding: Single Strand copper winding

1. iFlight product is for fun purposes only and does not support autonomous flight.

2. iFlight products may be used for civilian purposes only and any direct or indirect use of iFlight products for or in connection with the following is prohibited:

(1) Any military combat purpose or military combat related use;  

(2) Terrorist activities: The purchaser also shall require its customers or end users to comply with the foregoing requirements.

3. iFlight Partners must strictly adhere to applicable export control and sanction laws as well as any written compliance requirements regarding these controls issued by iFlight from time to time.

If Party A has violated applicable export control or economic sanctions laws and regulations, Party B has the right to immediately suspend delivery of products to Party A or terminate relevant cooperation without any liability.

For more specific content, please check: https://shop.iflight.com/Export-Policy-info