XING 2812 Cinelifter Motor

The principle of the camera stabilization using brushless direct-drive motors, In fact, gimbal based on BLDC motors is very similar to regular gimbal based on hobby servo.

The XING 2812 Cinelifter Motor is specifically engineered for the Centurion X8 BNF, delivering high-efficiency performance as a dedicated cinelifter motor.

Upgraded for enhanced smoothness, reliability, and power, these motors now reflect our manufacturing excellence and surpass previous performance benchmarks. Featuring new center-slotted N52H curved arc magnets, they drastically minimize motor response time, redefining efficiency for professional applications.

Sealed Case to prevent contamination by dust and dirt.

Hollow shaft for slipring

Configuration:24N28P,prove more torque.

KV: 1150KV

Weight(included wire): 77g

Dimension: φ33.55*42.8mm

Interphase Resistance: 83.21mΩ

Input Volts: 24V

Peak Current: 61.15A

Max Watt: 1423W

Mounting Holes: 19*19 φ3mm

Rotor Specifications: Segmented bell

Shaft Diameter: 5mm

Shaft Protruding Length: 15.15mm

Lead: 260mm/18AWG

Magnet: N52H Curved

Configuration: 12N14P

Bearing Specification: φ11*φ5*5

Winding: Single Strand copper winding

Model: GM110-8

Motor Out Diameter: Ф110±0.05mm

Configuration: 24N/28P

Motor Height: 26±0.2mm (Included with Encoder housing)

Hollow Shaft(OD): N/A

Hollow Shaft(ID): N/A

Wire Length: 610±3mm

Cable AWG: #24

Motor Weight: 534±1g

Wire plug: 2.5mm dupont connector

No-load current: 0.09±0.1 A

No-load volts: 20 V

No-load Rpm: 125~139 RPM

Load current: 2A

Load volts: 20V

Load torque(g·cm): 8000-12000

Motor internal resistance: 20.19Ω±5%（Resistance varies with temperature）

High voltage test: DC500V 1mA @2sec

Rotor housing runout: ≤0.1mm

Steering (axle extension): clockwise

High-low temperature test:

High temperature: Keep at 60℃ for 100 hours, and the motor can work normally after 24 hours at room temperature

Low temperature: Keep at -20℃ for 100 hours, and the motor can work normally after 24 hours at room temperature

Maximum power: ≤60W

Working current: 4-6S

Working temperature: -20~60℃;10~90%RH

1 x XING 2812 motor

1 x M5 Screw nut

4 x M3*6 screws

1 x XING 2812 motor

1 x M5 Screw nut

4 x M3*6 screws